With the introduction of the Evolution, Edge has entered a new
realm of the aftermarket diesel industry. Contained in this
tiny module is the capability not only to improve drive ability
and performance, but also the ability to display and clear trouble
codes, remove the speed and rev limiters and adjust power levels.
Edge Ford 7.3L Evolution
60-100 horsepower gains
to adjust speed and rev limiter
and clears trouble codes
0-60 and quarter mile times
1994-2003 Ford 7.3L
Evolution automatically makes a backup of your stock program
before proceeding to add a new program. This assures that you
will have the stock program if/when you desire to reprogram
your vehicle to its original stock program.
The Evolution is
also a powerful diagnostics tool. Not only can you view trouble
codes your vehicle may be displaying- which allows you to
fix them, but you can turn off that “Check Engine"
light when the program has been addressed. No more trips to
the dealer for a diagnostics tool.
The Evolution's small, lightweight design allows personalized control with
the touch of a button. With a backlit LCD screen, seeing and
reading codes is now a simple process. The unit not only displays
codes, but also displays a description of what these codes
means, which eliminates copying the code down and then finding
the manual to look them up.
The following power
gains are representative of an actual test vehicle. These
gains were measured on a SuperFlow Dyno at an altitude of
4400 ft above sea level, and represent power delivered to
the rear wheels of the test truck. The only modification made
to the test truck was the addition of the Edge Evolution.
Power gains may vary based on vehicle and geographical location.
Level 1: 40 Horsepower - 80 Foot Pounds of Torque
Level 2: 60 Horsepower - 140 Foot Pounds of Torque
Level 3: 80 Horsepower - 180 Foot Pounds of Torque
Ford 1999-2003 7.3L Powerstroke
Level 1: 60 Horsepower - 100 Foot Pounds of Torque
Level 2: 80 Horsepower - 160 Foot Pounds of Torque
Level 3: 100 Horsepower - 200 Foot Pounds of Torque
in fuel efficiency varies based on driving style
Evolution connects directly into the OBDII port underneath
the dash. Once connected the stock software is downloaded
and the new Evolution software is uploaded onto the
trucks ECM. All modifications are done during this process
and can be just as easily be switched back to stock
at any time.
Evolution was created with a small lightweight design
that allows personalized control with the touch of a
button. With a backlit LCD screen, seeing and reading
codes has been made simple. The unit not only displays
codes, but also displays a description of what these
codes mean, which eliminates copying the code down and
then finding a manual to look them up.
**Legal in California only for racing vehicles which
may never be used upon a highway.