 |
Quadzilla
Monster Air Intakes |
 |
 |
Quadzilla
Monster Air Intakes are the finest quality most cost effective intake
kit on the market.
Quadzilla Monster Air Intake Features:
- Add up to
35hp 65 ft. lbs of torque
- Increase
mileage up to 10%
- Simple Installation
- Sturdy Steel
Construction
- Powder Coated
Finish
|
About
the Quadzilla Monster Intake:
All Monster Air Intakes are made of 14 gauge metal and tig
welded for superior construction and appearance. Each intake is hand
assembled and welded in a job made from the particular vehicle the
intake is built for. This insures a perfect fit for every intake.
You will not find an intake system that is easier to install anywhere.
Once the fit
is perfect and the intakes are completely welded they are then powdercoated
using a wrinkled black finish that blends in perfectly with your
engine compartment.
The intakes
are the highest quality, longest lasting intakes available anywhere.
Don’t settle for cheap plastic imitations that are prone to
cracking or warping in the extreme temperature environment under
your hood.
|
| 
|
About
the Filter:
Quadzilla has teamed up with AFE filters to compliment our
intakes. We feel that these are the best filters with the least maintenance
at this time. While these filters are made by AFE they were made for
the Monster Air Intakes specifically. |
CHOOSE
A BETTER OIL-FREE FILTER
Advanced
FLOW engineering offers you a better choice of oil-free filters: New
Pro Dry S synthetic dry-media filters. Pro Dry S filters use a revolutionary
two-ply synthetic material that is functionally superior to traditional
paper media and single-ply synthetic, and easy to service. Pro Dry
S dry-media filters increase airflow providing improved horsepower,
torque, and fuel economy with 99.4%* filtration efficiency. Perhaps
the greatest benefit of new Pro Dry S filters is the convenience of
servicing these oil-free filters. To clean a Pro Dry S filter lightly
tap it on the ground, vacuum it, or wash with soap and water. Solvents
and oiling are not necessary. Pro Dry S dry-media filters by aFe are
now available on all of our popular air intake systems for gas and
diesel trucks, SUVs, and cars. Replacement Pro Dry S filters for all
air intake systems are also available and sold individually. |
| 2-LAYER
SYNTHETIC CONSTRUCTION FOR MAXIMUM AIRFLOW AND DUST-HOLDING CAPACITY |
 |
- Outer screen
provides strength and prevents damage to filter media.
- Thick layer
slows air velocity so dust particles fall out of suspension and
become trapped in fabric fibers.
- High efficiency
thin layer traps remaining dust particles without slowing airflow.
- Inner screen
provides support and quality without the need for additional internal
structures.
|
 |
- Up to 50%
airflow increase over stock.
- 99.4% dust
filtration efficiency** for engine protection.
|
| Our
revolutionary new dry synthetic media is easy to clean, and offers
three cleaning options: |
 |
Tap Clean:
You can tap your Pro Dry S filter and return it to 85% of
its original airflow. Simply remove your filter from your Intake and
lightly tap it on a solid surface. Tap and turn the filter until most
of the visible dirt has been released. Reinstall the filter in your
vehicle. Do not apply oil to the filter. |
 |
Vacuum
clean: You can vaccum your Pro Dry S filter and return it
to 96% of its original airflow. Remove the filter from the intake
and vacuum away the dirt using a shop vaccum or a regular house vaccum.
Reinstall the filter in your vehicle. Do not apply oil to the filter. |
 |
Wash
clean: You can wash your Pro Dry S filter and return it to
100% of its original airflow. Remove the filter from the intake kit.
Run the filter under running water from the inside out. Turn the filter
to remove all visible and hidden dirt. If your filter is coated with
grease or road grime, it may be necessary to use soap and water to
get it fully clean. You can completely submerge the filter in a mixture
of warm water and mild detergent (use a common household detergent
such as dish or liquid laundry soap) if needed. Rinse clean. Allow
the filter to dry completely (our synthetic media dries quickly and
should dry within a few hours in normal conditions). Reinstall the
filter in your vehicle. Do not apply oil to the filter. |
-
 |
Quadzilla
monster intake installation instructions. |
|
|
Pictures
of our new Shop
