Choate Ford 6.7L Full Running Daily Driver Engine

Product Name:Choate 6.7L Full Running Daily Driver Engine 2011-2019 Powerstroke 6.7L
Manufacturer: Choate Engineering Performance
Thoroughbred Diesel Part #: CEP67PFD
Fitment Notes: 2011-2019 Powerstroke 6.7L

Before purchasing please verify the year model engine is compatible with your truck.

2011-2012 

6.7 Powerstrokes Came stock from Ford with a 8-bolt flexplate and torque converter that are no longer manufactured. All 6.7 Powerstroke balanced assemblies from Choate Engineering come with the updated 6-bolt flexplate from 2013+ and require the customer to update the torque converter or purchase one from us directly.

2017+ 

6.7 Powerstrokes have a larger “Hole Diameter” for the motor mounts and bolts.

**Optional Parts are not installed. Optional parts are covered under the manufactures warranty and not by CHOATE.**

CHOATE Engineering Performance Crate Engine Features:

• 500 HP rated.
• This CHOATE engine is fully balanced, and is the perfect engine for spirited daily driving, consumer level towing and everyday life.
• Upgrades over the Model C include but are not limited to: Torque Plate Honing; Full Engine Balancing; Harmonic Balancer; Head Studs; Valve Seats; Rear Cover and Pickup Tube; Oil Pans; Welded Crank Gear;

Common Issues With The Ford Powerstroke 6.7L  (and how we fix them)

Main and Rod Bearing Clearance Issues- IE ,Spun Bearings. Our fix includes machining for the correct clearances as well as upgraded bearings designed to handle higher levels of
stress.
Valve Failures– OEM Exhaust Valves separate causing at the least, lost compression, at the worst, piston to valve contact causing catastrophic failure. We do not modify the existing
valves as most do, we use an all new valve with better materials that do not have this high-heat separation issue. Crank Gear Spinning- Standard on all our 6.7L builds is a welded crank gear. From Ford this gear is prone to spinning, throwing off timing, and bending all 32 pushrods. TIG welding the gear in place eliminates this issue.
Cam Tunnel Misalignment– The issue here comes with the aftermarket fix which is to use larger clearance bearings. This in turn causes low oil pressure. We do not use larger clearance bearings, we use our own proprietary bearings which allow for perfect alignment. Our 6.7’s see on average 5lbs more oil pressure at startup than others.

Choate Features:

• Cylinder Block
• Bore block back to crankshaft center line
• Hone block to 12Rk finish
• Crank Shaft
• Check crankshaft main and rod clearances
• Magnuflux crankshaft
• Balance rotational assembly
• Replace Main bearings
• Replace rod bearings
• Replace cam bearings
• Replace Main bolts
• Connecting Rods
• Inspect and condition rods
• Camshaft
• Inspect and polish camshaft
• Crankshaft
• Polish crankshaft
• Pistons
• Install Pistons
• Pistons, rings, Pin retainers weight matched prior to crank balancing (*optional ceramic and DFL coating available)
• Reman Heads
• Resurface heads
• Magnuflux and pressure test heads
• Cut new valve seats
• Cut valves
• Install new valve guides
• Install new valve seals
• Test spring tension
• Install New Head Gaskets
• Install Studs
• Install New Bed Seals
• Install Rear Main Seals
• Install New Lifters
• Rear Cover Gasket
• Rear Main Seal
• Rear Cover Installed
• New OE Harmonic Balancer
• New Flywheel
• Items Included:
• 2 Water pumps
• 4 Thermostats
• Fuel Rail Pressure Sensor
• Front cover and gaskets
• Turbocharger Turbo
• Pickup tube
• Map Sensor
• Coolant Temp Sensor
• Intake Air Temp Sensor
• Exhaust Back Pressure Sensor
• Engine Oil Pressure Switch
• Crank Position Sensor
• Camshaft Position Sensor
• Oil Cooler
• Fuel Filter
• For more information on Choate Engineering Performance call us at 1-859-737-4966