Hot Seller
fleece-fpe-34754
fleece

Fleece PowerFlo Lift Pump In-Tank Pump Assembly - 98.5-02 Dodge Cummins

Thoroughbred Sku #: FPE-34754

Item Options:

Install Sheet - PDF:
Prop 65:
WARNING: Cancer & Reproductive Harm - P65Warnings.ca.gov


Quick Ship

$1,049.00

free-shipping-no-handling

Applications:

View All applications

VERIFY VEHICLE FIT
Add a Donaldson P553203 Fuel Filter is a direct replacement filter?

Product Details

Product Name: PowerFlo Lift Pump In-tank Pump Assembly
Manufacturer: Fleece
Manufacturer Part #: FPE-34754
Thoroughbred Diesel Part #: FPE-34754
Application: 1998.5-2002 Dodge Cummins

Only from Fleece, a complete fuel supply upgrade kit for your 1998.5-2002 Dodge Cummins. The kit includes everything you need to properly route, plumb, pump, and filter fuel for your VP engine. Includes a new sending unit and float to get your fuel gauge working again! The PowerFlo Lift Pump is the latest OEM replacement performance lift pump from the diesel experts at Fleece Performance. The PowerFlo is the only in-tank lift pump capable of supporting up to 800 hp!

Direct OEM In-Tank Fitment: 

The PowerFlo Lift Pump requires no drilling, cutting, or sumps to cut into your fuel tank and installs in less than half the time of other high flow lift pumps.  

Dual Gerotor: 

Two is always better than one, and the PowerFlo delivers with two OEM quality gerotor pumps, increasing flow capacity and reliability over the factory pump. Capable of supporting up to 800 hp, including dual CP3 pump configurations.  

Seamless Integration: 

The active fill bucket eliminates the need for tank sumps, draw straws, and the ¼ tank issues typically encountered when seeking a higher flow lift pump to meet your engine’s need.

 

Application Notes

Operating Pressure: 15-17 psi at idle  

*Protected under US Patent No. D910,083 and US Trademark Reg. No. 6,878,860

Features:

  • PowerFlo Lift Pump with integral fuel sender
  • Donaldson 3 micron fuel filter and water separator (Donaldson P/N P553203)
  • Filter base with integral mounting
  • Distribution filter block / filter coupler
  • Push Lock hose and all necessary AN and barb fittings
  • Lifetime Limited Parts Warranty
  • For more information on Fleece call us at 1-859-737-4966.

Reviews

  • I have this pump in my 01 dodge , I am in the process of converting it to a p7100 injection pump, is there any way to get enough pressure out of this pump to run the p7100?

    Jordan Schofield | 3/9/2024

    No

  • How hard is it to change the fuel filter, and how often do they need to be replaced.

    Michael Herring | 2/9/2024

    Filter is a screw on design. 15000 miles

  • Is there a port somewhere for low pressure alarm or fuel pressure gauge? Do you sell an alarm or gauge that will work with this kit?

  • Is there a more economical in-tank lift pump option? I have a bone stock 2001 2500 24valve truck. Currently have the dodge in tank lift pump and idling around 9-10psi and going down the highway with no trailer around 6-7psi. I'm looking for something to get me a bit more pressure but stay below 15psi. Thank you

    Danny Ratulowski | 11/9/2022

    No, this is the only one we offer.

  • Will this work on my 06 ram 3500 quad cab long bed? If not can you email me the correct unit I would need to get. Thanks

    Caleb Richard Orton | 5/25/2022

    No, you will require this kit:

    https://www.thoroughbreddiesel.com/2006-dodge-ram-2500/fpe-34560/?HideOptionsEditButton=True

  • What kind of fuel heater would with this

    Michael Booth | 2/28/2022

    No fuel heater available for this at this time.

  • Can I use this with another aftermarket fuel filter housing that can still utilize the fuel heater since I live in the northern part of the country where it gets very cold in the winter?

    Sean | 11/11/2021

    Yes,  just make sure that the filter you choose will flow the correct amount of fuel for the VP’s power regiment.

  • Can I get this for a stock application For now before I do any power mods?

    Chief billie | 12/18/2020

    Yes, be a good starting point.

  • These fits in my truck without lift pump on the block just tank fuel pump

    Riky alcaraz | 10/7/2020

    Yes, these will work to replace either.

  • CAN YOU FINISH ANSWERING THE SECOND PART OF MY 1ST QUESTION?

    DAVID HYMES | 10/5/2020

    Yes, what is your question?

  • does the stock water in fuel sensor work in the fleece filter block, or is the wire connector left unplugged with no ECM or warning light reprocussions?

    david hymes | 9/30/2020

    No, it does not retain the factory water in fuel sensor.

  • I already have an in tank pump in my 02 Ram 2500 cummins. Can i just get the fleece as a replacement without the complete install kit?

    Chet | 8/30/2020

    Not at this time. Fleece only offers it in a kit.

  • Will still need the stock lift pump? ( engine block, left side).

    Jose Falero | 10/4/2019

    No. this pump is a huge upgrade over the stock lift pump.

  • I purchased and installed a power flo lift pump for my 2013 ram 2500 6.7 about 2 years ago. Recently I’ve noticed a whining noise, more like a weeeeee, in the pump, is this a sign of soon to be failure or may something else be going on. I hate to think that I’m going to be spending 8-9 hundred dollars every couple of years.

    Lauren Clinton | 8/12/2022

    You may send in a sound bite to our email , [email protected], we will try to assist you. The PowerFLo Lift Pump is also backed by a LIFETIME WARRANTY!

  • Does this include the entire installation kit like in this video that you guys made?https://www.youtube.com/watch?v=YBZ64TQjeMA

    Jeb Adaih | 10/21/2020

    The kits will include everything needed for the installation

  • Dose it remove air from fuel system?

    Ethan | 9/11/2020

    No, air removal.

  • Do I still need a low fuel pressure alarm for my 2002 5.9cummins if I install a in tank fleece fuel pump. If no why not?Thanks

    Dean MCLEAN | 6/28/2020

    Yes, the low fuel pressure alarm is always good to have in this model year.